Ulanqab6-meter
UlanqabMigao EImplementing multiple shifts of homework should fill in and submit records according to regulations.
During loading and unloading, the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed 50mm.
Ulanqab.The body in the lateral adjustment device of the driving plate should ensure a compressed state,UlanqabElectric background axis elevator,UlanqabSmall electric loading elevator, so that the gear has a certain radial constraint, and ensure that the gear and rack always mesh well throughout the entire operation.
To ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.
.When applying a normal force of 300N to any position on either side of the door using a rigid 5000mm2 square or circular flat surface in the locked position of the landing door, the door should be able to withstand and have no deformation; - Deformation not exceeding 30mm; After the test, it worked normally.
Later, when there is a major malfunction of the lifting platform, it should be repaired by professional personnel as soon as possible. After the malfunction occurs, it should not be used again to avoid accidents, personnel and property losses.
Setting requirements: The wall bracket should use the manufacturer's matching standard products.
When the wall bracket cannot meet the requirements of the construction site, it should be designed and calculated separately.
The usual operation of landing and docking. The installation position of the upper limit switch should comply with the following: when the lifting speed is less than 0.8m/s, the upper safety distance L left after the upper limit switch is triggered by the hanging cage should not be less than
When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
Product range.Setting requirements: For construction electric elevators with foundations installed on roof slabs, floors, or other lower suspended structures, the bearing capacity of the foundation support structure should be checked. Click here to download the construction technical information for free. Basic drainage facilities should be installed.
The entrance of each landing platform must be equipped with a landing door,UlanqabAutomatic elevator electric small, which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.
Mechanical devices controlled by cage movement should not be used to open or close the landing door.
From the above comparison, it can be seen that hydraulic electric lifting mechanisms have stable lifting, low noise, long service life, large load bearing capacity, and are relatively simple, making them suitable for use in stage equipment.
High quality brand.Implementing multiple shifts of homework should fill in and submit records according to regulations.
Greater than 0.04s; When the hydraulic buffer is used, the oil level shall be checked, and the difference between the net width and the outlet width of the cage door should not exceed 120mm. When the floor door is closed the cage shall not
The net height of the landing door opening should not be less than 8m, except for the gap between the lower part of the door that should not exceed 35mm, the size of any through-hole and opening related to the distance between any door and adjacent moving parts, as well as the gap around the door or between parts, should comply with the provisions of Table 4 of 'Mechanical Safety - Safety Distance to Prevent Upper and Lower Limbs from Touching Dangerous Areas' GB23821-2009.
Ulanqab.The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.
Model Example: Hanging Cage Specification: LABSC200/200TD3200x1500 Type I: 2900~3600 Type II: 2900~3600 Type V: 1800~250044003800 Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x0.02 (kN).
Principle of electric elevator rotary valve: When the electric elevator rises, the rotary valve will automatically open. To close the plug valve, and then turn the transmission handwheel to lower the plug and achieve sealing.