CologneSmall electric elevator platform,
Setting requirements: The foundation and foundation of the construction electric elevator should meet the requirements of the user manual. Before installing the construction electric elevator,CologneAll electric small elevator, the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.
The quality of the standard section should comply with the product manual and specification requirements.
Cologne.Setting requirements: Buffers should be installed below the suspension cage and counterweight running channel.
Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements, a torque wrench or special tool should be used to accurately tighten the bolts to the specified torque value according to the specified tightening sequence. When installing standard section connecting bolts, it is advisable to place the screw at the bottom and the nut at the top.
.The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.
The scaffolding of the parking platform should be laid tightly and firmly.
Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.
There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.
In addition to fixed modes, there are also types of car mounted mobile devices. As the name suggests, this type of lifting device is a combination of lifting equipment and car mounted systems. It is very flexible to move and of course, it is better to use it. For example, there are such lifting devices in airports, and car stations or sports stadiums may also be equipped with such devices, as they can be moved,CologneElectric elevator mechanism, So the scope of the operation is not limited to a specific place, but can be used wherever lifting operations are required. For example, when installing outdoor advertisements, mobile lifting equipment can be used to transport billboards or staff to the designated height for work. This type of equipment can also be divided into two types based on the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is the use of hydraulic oil to drive and reach a specified height. The electric mode is driven by a motor or teeth to lift to a certain height. However, currently, hydraulic lifting platforms are more widely used.
When the door is closed, except for the gap between the lower part of the door that should not exceed 35mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, routine inspections should be carried out according to regulations and inspection records should be filled out.
Emergency manual valve: In case of power failure, it can cause the car to descend to the nearest floor position and open the door
query.Double layer steel mesh: The diameter of the steel bars is 12mm with a spacing of 200mm.
Is the water cooling and air cooling of the hydraulic station the same?
Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.
Cologne.There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.
Horizontal lead screw mechanical electricity
Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.