Botou10 meter 
BotouElectric 
BotouFully selTo ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve, when adding hydraulic oil and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.
The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.
Botou.In addition,BotouElectric elevator, it is necessary to ensure the quality of the hydraulic oil, as some hydraulic oil manufacturers will choose hydraulic oil with poor quality. Hydraulic oil such as hydraulic lifting platforms not only cannot have any effect on folding arm elevators, but also affects the working efficiency of folding arm electric elevators due to deterioration issues.
In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between 1m and 2m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least 150mm above the ground.
.The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.
Work is essential, and the main protective accessories include safety belts, guardrails, protective covers, platforms and stairs, etc.
Vertical lead screw electric lifting mechanism: Adopting a lead screw transmission method, it can achieve the lifting of a double-layer tabletop. Multiple lifting platforms can be formed as needed, and different steps can be formed within the travel range to meet the needs of meetings and performances; Pavilion, Terrace, Tower, the manual pump can be operated to pump high-pressure oil to raise the car to the nearest floor position
Before installing the construction electric elevator, the foundation should be inspected and approved before installation.
The setting of the cable guide frame should comply with the user manual and regulatory requirements.
The cheapest.Principle of electric elevator rotary valve: When the electric elevator rises, the rotary valve will automatically open. To close the plug valve, it is necessary to first turn the handle to turn the plug to a 90 degree position until it is closed, and then turn the transmission handwheel to lower the plug and achieve sealing.
When a rigid 5000mm2 square or circular flat surface is applied with a normal force of 600N to either side of the door the door may not meet the above requirements, routine inspections should be carried out according to regulations and inspection records should be filled out.
Test conclusion.It is reported that a fixed electric elevator has good lifting stability and can only be used for fixed operations but safety should be maintained.
The counterweight guide rail should meet the specification requirements.
Before operating the construction electric elevator, making high-altitude operations easier
Installation position of upper limit switch: Under normal working conditions, the distance between the upper limit switch and the upper limit switch is 0.15m for SC type construction electric elevators, and 0.15m for SS type construction electric elevators (person)
Advantages of electric elevator rotary valve: Simplify the installation of electric elevator pipelines; The operation is more convenient, and the valve can be opened and closed at any time; The installation of a rotary valve reduces the friction of the sealing components; Compact structure, small size, and space saving; Increased the service life of electric elevator pipelines and solved the problem of easy oil leakage.
Botou.When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
Once again, weekly inspections should be conducted to check whether the connecting screws at various parts of the lifting platform are tightened, whether the sealing rings are damaged or ineffective, whether there is a lack of hydraulic oil,BotouAutomatic electric elevator, and whether the oil cylinder is leaking. It is necessary to clean the lifting frame, scissors, wiring, and oil cylinder once a week to avoid dust and debris affecting normal operation.
The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.