DundockSemi auVariable speed motors extend the lifespan of batteries and motors, as they only consume the necessary energy for operation.
Drain all the hydraulic oil in the oil tank, open the oil tank, take out the oil suction filter clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.
Dundock.During the trial load multiple tests should also be conducted. For the second trial load, an empty load test can be selected to verify whether the lifting and lowering speeds of the elevator are reasonable, whether the stability of the platform meets the requirements, whether the sound is normal, and whether the rated lifting height can be reached. If the test data is normal, a second trial load test can be conducted; The second trial load test can choose half load test, with a focus on verifying the stability of the platform. If the shaking resistance is within the allowable range, a third test - full load test can be conducted to determine whether all parameters of the platform are normal under the rated load state. If it is normal, the fourth test - overload test can be conducted, and 110% of the load can be added for the test to verify whether the anti overload device setting of the platform is reasonable. If the setting is correct, the lifting platform cannot rise under overload. If it can rise, it indicates that the overload device setting of the lifting platform is unreasonable, and the manufacturer should be asked to adjust the setting again.
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas from the elevator engine contains carbon monoxide. This is a toxic gas that has been exposed to low concentrations of carbon monoxide for a long time. It can cause symptoms such as headache, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion, and even brain damage. In severe cases, telescopic balance circuits such as starting the engine of the equipment in the garage.
.The scientific design schemes for elevators mainly include leveling and locking circuits, variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.
How should the elevator be maintained? When carrying out elevator maintenance, we should not only perform monthly maintenance,DundockPrice scissors hydraulic lifting platform, its weight is borne by the four parts of the elevator. Over time and we need to take into account both when carrying out maintenance.
How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
Equipped with a manual descent valve for emergency descent in case of power outage.
Features: New design, dual elevator anti rotation structure, dual speed descent system, * with a large elevation of up to 35 meters, stable, reliable, beautiful, and easy to operate are the main characteristics of the cylinder mounted electric elevator. Adopting multi-stage hydraulic cylinders for vertical ascent, the high-strength material and good mechanical performance of the hydraulic cylinders, as well as a tower shaped ladder shaped protective frame, make the elevator have a higher height
Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.
Where is good.The elevator has a non slip surface. The guardrail is durable and durable. After the end track is extended, it can accommodate larger goods.
How to maintain the elevator when it is not in use? The editor reminds users that if our elevator is not ready for use for a long time, we must take good care of the equipment when not in use.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people,DundockHydraulic automatic lifting platform, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, maintenance items, brand, model and specification of replaced parts, maintenance effect and whether the equipment still has problems after the maintenance is completed.
The fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable and easy to repair and maintain. Diesel powered models have two wheel, four wheel drive, and steering. Free turning equipment. Urgent descent system. The operation height ranges from 4 meters to 22 meters, with advanced equipment and high-power power.
agent.The person in charge of the work should not only inspect the condition of the vehicle and the operators, but also be responsible for checking the terrain environment and whether the descent meets the requirements of safety technical measures or pre developed work plans. If there is any discrepancy, corresponding elevator measures should be formulated before starting work.
The engagement between the same rotating components, such as gears, rolling mills, mixing wheels, etc. (Recommended reading: Maintenance knowledge of elevators).
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of the elevator. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
Dundock.The elevator adopts high-strength and high-quality materials, which have the advantages of beautiful appearance, small volume, light weight, stable lifting, safety and reliability. Its appearance allows for high lifting capacity in extremely small spaces. The column lifting system has the characteristics of large load capacity, large platform area, and convenient implementation. There are many applications for mobile elevators, so we must enhance the safety awareness of using aluminum alloy elevators. Below, let me tell you some precautions.
The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, chemical filling, etc., and can be equipped with various table forms (such as ball, roller, turntable, steering, tipping, telescoping), and with various ways (separate, linkage, explosion-proof), it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, Effectively solve various lifting and lowering difficulties in industrial enterprises, and ensure smooth production operations. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure provides high stability for the lift. The wide working platform and high bearing capacity make the high-altitude operation range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
At the end of the year, many customers called to inquire about elevators. During this time of year, various units need to hang lanterns, etc. Many customers do not know how to choose a suitable elevator. Below is an answer for everyone. Lifts can be generally divided into three types: manual traction mobile lifting and lowering platforms: This type of lifting platform is cost-effective, cheap, and widely used, When moving, it requires manual traction or mechanical pulling from a car, it requires an external 220V or 380V power supply to lift.