YuciHydraulic The lifting drive chain is a double chain structure, using industrial plate chains with high bearing capacity and safety factor.
The high-altitude work platform is a type of large-scale high-altitude work mechanical equipment. If you have any questions during use, you can directly consult our high-altitude work platform experts. Only correct use and regular maintenance can extend the service life of the high-altitude work platform, increase safety and reliability.
Yuci.A self-developed integrated built-in slider is used between each column, which reduces the dynamic gap between the columns and makes the operation smoother and more reliable during lifting, far superior to ordinary independent guide wheel support structures.
The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
.The general order for maintenance is to start with the lower arm, then the middle arm, and then the upper arm.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, wood processing chemical filling, etc., to meet the lifting requirements of different operation heights, and can be equipped with various table forms (such as ball, roller, turntable, steering, tipping telescoping), and with various ways (separate, linkage, explosion-proof), it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, and ensure smooth production operations. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure provides high stability for the lift. The wide working platform and high bearing capacity make the high-altitude operation range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
Attention: When replacing the adjusting steel wire rope the half round head bolt should be unscrewed first to allow the moving nut to roll together with the force bolt, so as not to move the nut up and down too much and damage other components. After the replacement of the safety wire rope on the elevator platform, adjust the position of the collision rod from the beginning to reach the super high limit position. The limit switch of the landing elevator platform should be regularly inspected and replaced or repaired in case of damage.
（2） Year-end maintenance and inspection of hydraulic and pipeline connections. If the pipeline is damaged, it should be replaced immediately; When there is looseness in the connection part, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturers
How should the elevator be maintained? We have a lift that has been in use for a while but it's not working properly. Do you know the reason? This is because the elevator needs to be maintained after being used for a period of time. Let's take a look at the maintenance process of the elevator: (1) During monthly maintenance of the elevator, personnel must enter and work inside the elevator, and the elevator must be suspended to prevent sudden lowering of the elevator and causing casualties.
Because many customers have reported that after buying the elevator and using it,YuciPit type lifting hydraulic platform, it is placed in the warehouse, and there are various abnormal situations when it is used again during the partition time. Therefore, if it is not ready for use for a long time, we must do a good job of long-term preservation and maintenance.
A type of elevator equipment consisting of a walking mechanism, hydraulic mechanism, electric mechanism, and support mechanism. The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Good quality.Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, press the up and down buttons to check the mechanical operation,YuciFoot hydraulic platform lift truck, check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, stand in the center position, press the up button, slowly raise the workbench, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
Single masted elevators are widely used in factories, hotels, restaurants, stations, cinemas, exhibition halls, and other places. They are a good safety companion for maintaining equipment, replacing lighting fixtures,YuciFour column aluminum alloy hydraulic lifting platform, electrical appliances, cleaning and maintenance, and other purposes.
Yuci.The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights, and can be equipped with various table forms (such as ball, roller, turntable, steering, tipping, telescoping), and with various ways (separate, linkage, explosion-proof) it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, Effectively solve various lifting and lowering difficulties in industrial enterprises, we should not only perform monthly maintenance, but also conduct year-end maintenance. The inspection positions for year-end maintenance and monthly maintenance are different