After the elevator is lifted, it is necessary to fully study the maintenance manual of the elevator and do a good job in use and maintenance. In the detection of various indicators of the elevator, it is necessary to follow the regulations and ensure that the elevator is idle.
The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container, mold manufacturing, wood processing, chemical filling, etc.,ShiguaiElectric hydraulic mobile lifting platform, to meet the lifting requirements of different operation heights, and can be equipped with various table forms (such as ball, roller, turntable,ShiguaiHydraulic fixed lifting platform, steering, tipping telescoping), and with various ways (separate, linkage, explosion-proof), it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, and ensure smooth production operations. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure provides high stability for the lift. The wide working platform and high bearing capacity make the high-altitude operation range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
Shiguai.The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the box. The hydraulic oil is darkened, sticky, or has foreign objects such as gravel. If found, it should be replaced in a timely manner. Professional mobile elevator manufacturer with high prices, service, on-site settlement, and honest operation!
How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, maintenance effect,ShiguaiElectric hydraulic lifting platform small, with high safety and light overall weight; Compact structure, allowing access to narrow passages and elevators; A self-developed integrated built-in slider is used between each mast, which reduces the dynamic gap between the masts and makes the operation smoother and more reliable during lifting, far superior to ordinary independent guide wheel support structures; The lifting drive chain adopts a double chain structure and industrial plate chain, with high bearing capacity and safety factor; The guardrail structure is integral and collectible, making it extremely simple and convenient to operate; The hydraulic power unit adopts an integral pump station, with a compact structure and reliable performance; The hydraulic system is equipped with an emergency descent function, effectively ensuring personal safety; The equipment is equipped with leakage protection switches, emergency stop switches, limit switches, etc. The button boxes are all waterproof in design.
Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturers
Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, with flexible movement, and easy lifting. Only one person can complete forward, backward, turning, slow walking, and up and down movements saving labor and effort. Can be designed and produced according to user requirements.
Single column lifting platform is suitable for single person climbing operations.
The hydraulic system is equipped with an emergency descent function to prevent power outages and unexpected situations, and the emergency operation is simple.
Highly recommended.Attention must be paid to the rotating parts of the elevator. When the engine is running. Hands and tools must be kept away from rotating fan belts and fans. During the test drive, it is necessary to be in a spacious area and ensure that the aluminum alloy elevator can safely stop and turn effectively.
The hydraulic power unit adopts an integral pump station, with a compact structure and reliable performance.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
The model of the elevator; The prices of different models of elevators vary.
Workshop cost.The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
What is the main function of the elevator during smooth start and stop during use? In addition to the conventional brake, the frequency converter is an important component in order to smoothly lift and lower the elevator during operation. The smooth rise and fall of the elevator is attributed to the function of the frequency converter. Its stepless control of the motor speed of the elevator makes the entire lifting process smooth and comfortable. But this is not the only benefit of using frequency converters in elevators. The frequency converter is equipped with special elevator application software to integrate it with modern lifting systems. This application software includes a mechanical brake specially designed for elevators. This is what the elevator needs to operate. In different situations, braking can be set on/off to meet the different requirements of the motor and system. The frequency converter is convenient for users to use. Users only need to input speed and acceleration, and other values are calculated by the frequency converter. Unlike other frequency converters, it can automatically calculate the gear ratio and has a large overload capacity. Due to the ability of small frequency converters to handle high loads in a short period of time, excessive volume of the frequency converter can be avoided. Ensure the safe operation of the elevator.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
Shiguai.The entire elevator is made of high-strength aluminum profiles, which have high strength, beautiful appearance, small size, light weight, convenient movement, and are suitable for use in factories, hotels, buildings, shopping malls, stations, airports, sports venues, etc.
The model of the elevator; The prices of different models of elevators vary.
Double column electric elevator: a newly designed new generation product, made entirely of high-strength aluminum profiles. Due to the high strength of the profiles the deflection of the lifting platform is minimal. Adopting a double mast column structure, a large platform area it has a large load capacity, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used in factories, hotels, buildings, shopping malls, stations, airports, sports venues, etc. The three column elevator can be used for the installation and maintenance of power lines lighting appliances, as well as for single person work such as high-altitude cleaning. The three sets of masts support the operation platform to lift synchronously and other high-altitude operations, and the support structure is the same as the single masts platform. It has a super large load capacity and excellent work stability. Integral elevating four column electric elevator: it is refined from high-strength aluminum profiles. Due to the high strength of profiles, it adopts four mast column structure, which has excellent stability, flexible operation, large load capacity, large platform area and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. Minimize the deflection of the lifting platform. This elevator is widely used in factories, hotels, buildings, shopping malls, stations, airports, sports venues, etc. It can be used for installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations such as high-altitude cleaning.