Gu YeFour coluSingle mast elevator Standard configuration of single mast elevator: platform height specifications: optional 4m, 6m,Gu YeHydraulic lifting platform lowering platform, 8m, 9m; Power supply: single-phase AC (AC220V/50HZ), with a compact structure and reliable performance.
Gu Ye.Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground, press the up and down buttons to check the mechanical operation, check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, stand in the center position, slowly raise the workbench, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
（2） Year-end maintenance and inspection of hydraulic and pipeline connections. If the pipeline is damaged, it should be replaced immediately; When there is looseness in the connection part, tighten the pipe joint.
.The single column elevator is an indoor type,Gu YeMobile hydraulic lifting platform, widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter general lobbies. It can easily enter and exit the elevator with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall sticking and exploration work, and there are no dead corners during work.
Hydraulic lifting platforms can be divided into: four wheel mobile, two wheel traction, car modification, car type, auxiliary self-propelled, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons, and can also be customized according to user requirements, with a high load capacity of up to 10 tons.
Test run or use completed. The elevator and site must be cleaned. When closing the hoist cover or other assembly cover. Items such as tools, rags, and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.
The single mast elevator adopts high-strength and high-quality materials, which have the advantages of beautiful appearance, small volume, light weight, smooth lifting, safety and reliability.
In the process selection of elevator products, we must pay attention to various matters and not blindly choose. The best thing is to conduct market research, on-site investigation and procurement of the product, which can reduce the occurrence of faults. Good product performance and quality have created good usage effects for us
The lifting drive chain is a double chain structure, using industrial plate chains with high bearing capacity and safety factor.
Market trend.What are the standards for selecting manufacturers of elevators? After confirming the model, configuration, and manufacturer, you can basically understand how much the user wants for a lift.
The scientific design schemes for elevators mainly include leveling and locking circuits, telescopic balance circuits, variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.
Single masted elevators are widely used in factories, hotels restaurants, stations, cinemas, and other places. They are a good safety companion for maintaining equipment, painting and decorating, replacing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.
At the end of the year, many customers called to inquire about elevators. During this time of year, various units need to hang lanterns, etc. Many customers do not know how to choose a suitable elevator. Below is an answer for everyone. Lifts can be generally divided into three types: manual traction mobile lifting and lowering platforms: This type of lifting platform is cost-effective, cheap, and widely used, When moving, it requires manual traction or mechanical pulling from a car, and when lifting, it requires an external 220V or 380V power supply to lift.
Inspection requirements.Check the hydraulic oil quality and level. When the lifting platform is raised to a high position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the oil tank. When the color of hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, we should not forget to perform year-end maintenance on the elevator. Let's take a look at how the elevator should undergo year-end maintenance.
Check for wear on rollers, intermediate shafts and bearings, etc.
The elevator has a non slip surface. The guardrail is durable and durable. After the end track is extended boom hinge shafts and bearings it can accommodate larger goods.
Gu Ye.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator,Gu YeSmall hydraulic elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
Hydraulic lifting platform products are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, electric starting self supporting legs, large working area, and especially the ability to cross obstacles for high-altitude operations.
Double masted lifting platform: The new generation product of the design is made of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.