RubinAutomaticAnd different uses: single column electric elevators: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall work and exploration work, without dead corners. The single column electric elevator equipped with a gantry cross frame accessory, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to 1m, and can operate stably on steps. Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
Rubin.The engagement between rotating and fixed components, such as rotating mixers and unprotected open shell mixer devices.
Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, convenient operation, and easy lifting. Only one person can complete forward, backward, turning, fast, slow walking, and up and down movements, saving labor and effort. Can be designed and produced according to user requirements.
.Double masted lifting platform: The new generation product of the design is made of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
We are well aware of the harm of pressure, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil,RubinMobile hydraulic lifting platform, reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!
Variable speed motors extend the lifespan of batteries and motors as they only consume the necessary energy for operation.
Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
After assembly and debugging, roll and move the nut to the left end of the bolt and tighten the half round head bolt. Adjust the position of the collision rod up and down based on the lifting degree of the landing elevator platform, so that when the lifting degree of the landing elevator platform exceeds the predetermined height, move the nut to collide with the collision rod and roll it clockwise. Push the limit switch contact to cut off the power supply.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
Home page recommendation.Summary: Elevators can be large or small, and regardless of size, there should be no sense of luck during operation. It is necessary to establish correct safety awareness in order to ensure safety.
Hydraulic lifting platform products are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, hotels, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight self-propelled walking, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
Firstly, unstable voltage can easily burn out various electrical components inside the operation box, making the equipment unable to receive signals.
The equipment voltage is 24V DC, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator it is necessary to press the correct angle first. When tightening screws, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, and whether the equipment still has problems after the maintenance is completed.
Platform part: It is a steel structure platform that carries heavy objects, which can be closed (i.e. car type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame.
The high-altitude work platform is a type of large-scale high-altitude work mechanical equipment. If you have any questions during use, you can directly consult our high-altitude work platform experts. Only correct use and regular maintenance can extend the service life of the high-altitude work platform, increase safety and reliability.
Rubin.What are the configuration requirements for the upcoming elevator; Generally speaking, the higher the configuration requirements of a lift, the higher the price of the lift. Users should be aware of this, so they must choose the appropriate model and configuration based on their own needs,RubinLifting hydraulic lifting platform, not only to avoid resource waste but also to ensure the production efficiency of the lift.
The general order for maintenance is to start with the lower arm,RubinHydraulic lifting platform, then the middle arm, and then the upper arm.
Two sets of masts support the synchronous lifting of the working platform, and the elevator has stable operation; The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift; Can be equipped with gantry cross frames; Having the same convenient maneuverability as a single mast, the support structure is the same as a single mast platform; It has good load-bearing capacity and is suitable for no more than two people climbing at the same time.