Matt SarkaFixeThe scientific design schemes for elevators mainly include leveling and locking circuits, telescopic balance circuits, variable amplitude balance circuits, emergency lowering systems, etc. In order to prevent sudden damage to the hydraulic system or pipelines of the platform due to accidents,Matt SarkaElectric lifting hydraulic platform, and to ensure that the workbench does not experience situations that endanger the safety of personnel and equipment such as sudden arm fall or workbench overturning, we have designed different solutions for each system according to its different conditions.
After the elevator is lifted it is necessary to fully study the maintenance manual of the elevator and do a good job in use and maintenance. In the detection of various indicators of the elevator, it is necessary to follow the regulations and ensure that the elevator is idle.
Matt Sarka.Platform part: It is a steel structure platform that carries heavy objects, which can be closed (i.e. car type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame.
Blow out the plunger with compressed air, then install it and reinstall it.
.The general order for maintenance is to start with the lower arm, then the middle arm, and then the upper arm.
At the end of the year, many customers called to inquire about elevators. During this time of year, various units need to hang lanterns, etc. Many customers do not know how to choose a suitable elevator. Below is an answer for everyone. Lifts can be generally divided into three types: manual traction mobile lifting and lowering platforms: This type of lifting platform is cost-effective, cheap, and widely used,Matt SarkaAutomobile hydraulic lifting platform, When moving, it requires manual traction or mechanical pulling from a car, and when lifting, it requires an external 220V or 380V power supply to lift.
Summary: Elevators can be large or small, and regardless of size, there should be no sense of luck during operation. It is necessary to establish correct safety awareness in order to ensure safety.
Drain all the hydraulic oil in the oil tank, open the oil tank, take out the oil suction filter clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.
Lifts, due to their superior performance and convenient use, occupy a large share in the heavy machinery industry and have always been trusted by customers.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
project.Check the hydraulic oil quality and level. When the lifting platform is raised to a high position the hydraulic oil level should be 40-50 millimeters higher than the bottom of the oil tank. When the color of hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, how should the elevator be maintained? While we perform monthly maintenance on the elevator, we should not forget to perform year-end maintenance on the elevator. Let's take a look at how the elevator should undergo year-end maintenance.
Equipped with an overload hydraulic safety protection system for the lifting platform. For a long time, the manufacturer of mobile elevator has no turnover to avoid price difference, and the price is 20% higher than the market value! More than one ton is more expensive!
According to the number of masts, it can be divided into: single mast lifting platform: a work platform supported by a single mast, which is an early form of elevator. The entire machine is light in weight and flexible in movement, suitable for single person operation. After condensation, it can enter general standard doorways and elevators in buildings.
Compact in structure, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.
In the process selection of elevator products, we must pay attention to various matters and not blindly choose. The best thing is to conduct market research,Matt SarkaElevator hydraulic lifting platform, on-site investigation, and procurement of the product, which can reduce the occurrence of faults. Good product performance and quality have created good usage effects for us
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
Matt Sarka.Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, mold manufacturing wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights and can be equipped with various table forms (such as ball, roller, turntable, steering, telescoping), and with various ways (separate, linkage, explosion-proof), it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, Effectively solve various lifting and lowering difficulties in industrial enterprises, and ensure smooth production operations. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure provides high stability for the lift. The wide working platform and high bearing capacity make the high-altitude operation range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.