Hamburg Altona
Hamburg HaburgOnce again, weekly inspections should be conducted to check whether the connecting screws at various parts of the lifting platform are tightened, whether the sealing rings are damaged or ineffective, whether there is a lack of hydraulic oil, and whether the oil cylinder is leaking. It is necessary to clean the lifting frame, scissors, wiring,Hamburg HaburgPressure loading lifting platform, and oil cylinder once a week to avoid dust and debris affecting normal operation.
The hook of the seat belt should not be hung on unstable or moving objects.
Hamburg Haburg.When a hydraulic lifting platform malfunctions, it is necessary to take time to prepare accordingly. At this time, it is necessary to provide timely feedback or communicate with the manufacturer. If a voltage range is used to detect the hydraulic lifting platform, it is necessary to turn on the power in this case. The circuit schematic is used to measure the electrical circuit. At this time, the voltage value can be measured, and the voltage value can also understand where the fault point is. Therefore, in this case,Hamburg HaburgMobile hydraulic loading and unloading platform, it is necessary to learn to analyze.
Introduction to Fixed Boarding Bridge Loading and unloading Mobile Boarding Bridge is a very common structural form in modern logistics sites. It is the point and endpoint of the enterprise logistics chain, and a loading and unloading operation platform for enterprises to quickly and turnover products and goods. The height of the loading and unloading operation platform is fixed, but there is always a certain height difference or gap between the transportation vehicles and the loading and unloading platform due to the height of the carriage. Causing the forklift to be unable to enter and exit the transportation vehicle for direct loading and unloading of goods. Use the boarding bridge to provide reliable connections. Enable forklift trucks to quickly enter and exit transportation vehicles for loading and unloading operations.
.Application and characteristics of stage elevators: Stage elevators, also known as lifting stages, are specifically installed on the stage and used for lifting and rotating the stage. They are called stage elevators. It has multiple functions such as lifting,Hamburg HaburgHydraulic lifting platform, rotating, and tilting and adopts protective measures such as self-locking, interlocking, travel switch, mechanical limit, hydraulic explosion-proof, etc.
Check the hydraulic oil quality and level. When the lifting platform is raised to a high position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the oil tank. When the color of the hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, it should be replaced immediately; When there is looseness in the connection part, tighten the pipe joint.
Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Add oil to the above components for maintenance of outdoor elevators and factory elevators. Extend the service life of bearings.
The above detailed introduction, so that they can have a clear goal when choosing, and then choose the elevator that is suitable for customers.
When using a hydraulic lifting cargo elevator, it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, in order to ensure safety production there may be short lines or damaged components. Using a table for inspection is relatively better.
Safety protection components, it is essential to install a lifting platform for proper protection. The main protective accessories include safety belts, guardrails, protective covers, platform stairs etc.
Installation conditions.Copyright © 2006-2022 Yan-wei.Net.All Rights Reserved.
The above detailed introduction, I believe everyone has a certain understanding of elevator selection, and then choose the elevator that is suitable for customers.
Staying below high-altitude work sites is prohibited and safety nets or other protective devices should be installed below the work site to avoid injury from falling objects.
The drive motor can stop the movement of the rack on the pillar.
Quality department.The hook of the seat belt should not be hung on unstable or moving objects.
Therefore, when making a selection, it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
The use of highlights is cost-effective. When aluminum alloy elevators were in the market, their price was also a significant highlight. Because manufacturers make reasonable and moderate pricing decisions in their daily processes, it is well known that manufacturers generally consider manufacturing costs when pricing. and
Hamburg Haburg.If hydraulic elevators are used on campus, it can better enhance the safety and security of the campus. For campuses, especially after school every day, there are a large number of parents and there are also safety hazards such as people and cars. Maintaining order in such situations is a good idea.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
The reduction gearbox, gearbox, external gear teeth, and other parts, as well as the hydraulic oil, are all carried out according to the requirements in the table.