Saint EtienneL
Saint EtienneHCopyright © 2006-2022 Yan-wei.Net.All Rights Reserved.
Staying below high-altitude work sites is prohibited, and safety nets or other protective devices should be installed below the work site to avoid injury from falling objects.
Saint Etienne.When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
Regularly check all wires and cables for damage,Saint EtienneHydraulic lifting platform, and promptly wrap and replace the damaged parts.
.The drive motor can stop the movement of the rack on the pillar.
The current fixed hydraulic elevators are mainly enclosed or meshed lifting channels surrounded by buildings and light steel structures, and use hydraulic cylinders to lift the platform. Its main components are as follows: the lifting passage part: a closed or mesh frame surrounded by buildings or light steel structures a fixed hydraulic lifting platform with steel guide rails installed on both sides of the internal driving part: it is equipped with hydraulic driving motors, oil pumps, safety valves, fixed hydraulic lifting platform speed control valves The small oil tank cylinder part of hydraulic components such as directional valves: composed of one or more cylinders of a lifting cylinder, or a lifting shear fork frame, forming a door system. The closed or mesh platform door or door system consists of a steel structure, with manual and automatic doors. Generally, signal, safety, lighting, and other devices. The platform part is a steel structure platform that carries heavy objects, with guide rollers or guide shoes on both sides. The platform bottom can be connected to the lifting cylinder or lifting scissor type steel frame auxiliary parts, which are composed of hydraulic pipe fittings, pipelines pressure gauges, and steel structure bases; Safety devices: safety valves, limit limits, door electromechanical interlocking rupture valves, emergency switches, and electrical short circuit protection.
When using the elevator, we should listen for any abnormal noise. If there is any abnormal noise, we should immediately stop using it to avoid serious damage to the elevator.
Hydraulic loading elevators must strictly carry out load-bearing operations in accordance with regulations. Otherwise, it may harm people and objects!
It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, manufacturers can choose a variety of manufacturing materials when producing fixed loading and unloading platforms, and each material brings different effects when used. For many manufacturers, in order to improve the stability of loading and unloading platforms during use, they attach great importance to the selection of manufacturing materials. Generally, materials with high stability will be used as much as possible, as such materials can achieve better results in application.
management.Introduction to Fixed Boarding Bridge Loading and unloading Mobile Boarding Bridge is a very common structural form in modern logistics sites. It is the point and endpoint of the enterprise logistics chain, and a loading and unloading operation platform for enterprises to quickly and turnover products and goods. The height of the loading and unloading operation platform is fixed, but there is always a certain height difference or gap between the transportation vehicles and the loading and unloading platform due to the height of the carriage. Causing the forklift to be unable to enter and exit the transportation vehicle for direct loading and unloading of goods. Use the boarding bridge to provide reliable connections. Enable forklift trucks to quickly enter and exit transportation vehicles for loading and unloading operations.
Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.
Troubleshooting: When the elevator power light is turned on, press the up button, the motor rotates, but the lifting platform does not rise. This may be due to the reversal of the motor after the three-phase power supply is connected, just change the two phase wires of the heavy machine.
Function: Convenient unloading, strong stability, and low maintenance cost. Suitable for various vehicles on loading and unloading sites and places with relatively busy traffic. Loading and unloading platforms, lifting platforms, and unloading platforms: anti slip devices: This device is welded from steel plates and can effectively achieve anti slip function, which is reliable.
safety requirements .Secondly, for the replacement of hydraulic oil on the lifting platform, it is recommended to replace it every three months. If the frequency of use is not high, it can be replaced once a year. The hydraulic oil must be clean, and after changing the hydraulic oil,Saint EtienneSmall hydraulic platform loading and unloading truck, it must be automatically lifted and lowered 2 to 3 times to ensure that the air in the oil cylinder is completely discharged, maintain sufficient space, and ensure that the lifting platform can be lifted to the rated lifting height.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
Update Log
Saint Etienne.Because hydraulic elevators have the function of automatic and flexible lifting, they can provide protection for the safety of the campus and surrounding areas. Hydraulic elevators have many advantages, such as the ability to use hydraulic drive, which makes it easy to maintain their lifting speed. This is also determined by the reliability or durability of hydraulic methods. Of course, it also has no blind spots and is sturdy and reliable during normal use. The important thing is that the possibility of compression and collision resistance is relatively small, so it is very convenient to use,Saint EtienneDual hydraulic lifting platform, and it is beautiful and durable. Among them, its guidance is relatively good, with the characteristics of flexibility, reliability, and collision resistance.
Replace with
The use of highlights is cost-effective. When aluminum alloy elevators were in the market, their price was also a significant highlight. Because manufacturers make reasonable and moderate pricing decisions in their daily processes, it is well known that manufacturers generally consider manufacturing costs when pricing. and