Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, brand, model and specification of replaced parts, maintenance effect,HaodaPrice of hydraulic lifting platform, and whether the equipment still has problems after the maintenance is completed.
Haoda.The hydraulic working system of the elevator mainly uses hydraulic pumps for power, so the hydraulic system of the hydraulic elevator needs strong sealing performance. Firstly, it prevents air intrusion and secondly, water intrusion. Air intrusion can oxidize the hydraulic oil, and if there is too much air, causing its function to fail and increasing the wear of the hydraulic cylinder. Due to the fact that the majority of customers cannot ignore it, it is necessary to replace the emulsified hydraulic oil of hydraulic elevators in a timely manner. If impurities are found in the hydraulic system, it is necessary to clean them in a timely manner, so that the hydraulic oil can be considered and the hydraulic components can be cleaned one by one.
Elevator: The fully automatic high-altitude work platform has a sturdy structure, which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, it can walk in different working states without the need for external power supply. The handle can walk at an adjustable speed, convenient operation, and easy lifting. Only one person can complete forward, backward, turning, fast, slow walking and up and down movements, saving labor and effort. Can be designed and produced according to user requirements.
.What are the standards for selecting manufacturers of elevators? After confirming the model, configuration, and manufacturer, you can basically understand how much the user wants for a lift.
Double masted lifting platform: The new generation product of the design is made of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
Hydraulic lifting platforms are widely used in factory maintenance, municipal construction, and decoration of hotels in industrial and mining enterprises, with reliable quality and perfect performance.
Equipped with an overload hydraulic safety protection system for the lifting platform. For a long time, the manufacturer of mobile elevator has no turnover to avoid price difference, and the price is 20% higher than the market value! More than one ton is more expensive!
Therefore, high-altitude work equipment has received increasing attention, and the continuous development and innovation of lifting and lowering have gained the trust and use of customers. The following is an introduction by the editor to everyone: The operation status of the elevator. The elevator products are made of high-strength and high-quality materials, which can be divided into single mast column type, double mast column type, three mast column type,HaodaPit type lifting hydraulic platform, and four single pillar type according to the lifting height. The elevators use high-strength and high-quality materials, which have the advantages of beautiful appearance, small volume, light weight, smooth lifting, safety and reliability. Below, the editor will introduce the product description of the single column elevator.
Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
Installation material list.The elevator is made of high-strength and high-quality materials, which have the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability. It is widely used in factories, hotels, stations, airports, exhibition halls and other places. It is a good safety companion for maintenance of equipment, painting and decoration, replacement of lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.
The platform extends by 0.9 meters, expanding the working range.
Attention must be paid to the rotating parts of the elevator. When the engine is running. Hands and tools must be kept away from rotating fan belts and fans. During the test drive, it is necessary to be in a spacious area and ensure that the aluminum alloy elevator can safely stop and turn effectively.
Summary: Elevators can be large or small, and regardless of size, there should be no sense of luck during operation. It is necessary to establish correct safety awareness in order to ensure safety.
Analysis project.Semi automatic assisted walking lifting platform: It has more driving devices than traction lifting platform. If people cannot push it, they can use walking or lifting platform, without the need for external power supply, improving work efficiency.
Secondly, for the annual maintenance of elevators, according to certain standards, the following points can be followed. Annual maintenance is a major maintenance, so special attention should be paid to the following points: check all hydraulic pipelines and joints of the elevator. The pipeline must not be damaged, and the joints must not be loose. All joints must be tightened.
Single group high-strength mast elevator with light weight and good maneuverability, suitable for single person operation.
Haoda.Because many customers have reported that after buying the elevator and using it, it is placed in the warehouse, and there are various abnormal situations when it is used again during the partition time. Therefore, if it is not ready for use for a long time, we must do a good job of long-term preservation and maintenance.
Enhance the lift function
Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected,Haoda1.5 ton hydraulic lifting platform, and the power must be verified and hung up; No power transmission, people working quo; Identification plate for. During the maintenance process, it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work, after the maintenance is completed, the grounding wire must be connected before the power test can be conducted. When replacing elevator spare parts, it is necessary to ensure that the spare parts are available