Drain all the hydraulic oil in the oil tank, open the oil tank, take out the oil suction filter, clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.
The equipment is equipped with leakage protection switches, emergency stop switches, extreme electrical limit switches, etc. The button boxes are all waterproof in design.
Zanstad.The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the box. The hydraulic oil is darkened, sticky, or has foreign objects such as gravel. If found, it should be replaced in a timely manner. Professional mobile elevator manufacturer with high prices, service on-site settlement, and honest operation!
Drain and discard the hydraulic oil, tighten the joint, remove the oil filter, clean it with compressed air, and then return it to the oil tank and connect the pipeline.
.What are the configuration requirements for the upcoming elevator; Generally speaking, the higher the configuration requirements of a lift, the higher the price of the lift. Users should be aware of this, so they must choose the appropriate model and configuration based on their own needs, not only to avoid resource waste but also to ensure the production efficiency of the lift.
How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
The elevator features and advantages of a smooth and repair free pivot, with built-in lanyard fixing points. An ergonomic joystick that can be operated from a platform or ground.
Therefore, the use of stable voltage in elevators is crucial for safe operation. Elevators have high stability, a wide working platform, and a high load-bearing capacity making high-altitude operations more efficient and safe. To avoid the harm of voltage instability, the four legs of the elevator must be supported because the four tires are not under force, but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article, you may know that oil contains excessive water impurities, which can rust the hydraulic components of the elevator, emulsify and deteriorate the oil, reduce the strength of the oil film, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance, it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!
Affordable price.Two sets of masts support the synchronous lifting of the working platform, and the elevator has stable operation; The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift; Can be equipped with gantry cross frames; Having the same convenient maneuverability as a single mast, the support structure is the same as a single mast platform; It has good load-bearing capacity and is suitable for no more than two people climbing at the same time.
The main lifting mast adopts high-strength profiles, which have high safety and light overall weight.
The hydraulic lift is widely used in various industrial enterprises and production lines such as automobile, container,ZanstadHydraulic elevator lifting platform, mold manufacturing, wood processing, chemical filling, etc., to meet the lifting requirements of different operation heights, and can be equipped with various table forms (such as ball, roller, turntable, steering, tipping, telescoping), and with various ways (separate, linkage, explosion-proof), it has the characteristics of stable and accurate lifting, frequent starting, large load capacity, etc, Effectively solve various lifting and lowering difficulties in industrial enterprises,ZanstadHydraulic platform lifting platform, and ensure smooth production operations. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure provides high stability for the lift. The wide working platform and high bearing capacity make the high-altitude operation range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.
Due to its beautiful appearance, light weight, flexible operation, and convenient implementation, elevators are particularly suitable for various high-altitude work platforms, such as high-altitude maintenance, factories, decoration, cleaning and anti-corrosion, etc. At the same time, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted lifting platforms: three sets of masted support work platforms lift synchronously, and the support structure is the same as a single masted platform, with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading, and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground, press the up and down buttons to check the mechanical operation check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, stand in the center position, press the up button, slowly raise the workbench, stop at the desired position, and start working. When working at heights, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
Drain and discard the hydraulic oil, tighten the joint, remove the oil filter, clean it with compressed air and then return it to the oil tank and connect the pipeline.
Zanstad.Double column electric elevator: a newly designed new generation product, made entirely of high-strength aluminum profiles. Due to the high strength of the profiles, the deflection of the lifting platform is minimal. Adopting a double mast column structure, it has a large load capacity, a large platform area, excellent stability, flexible operation, and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used in factories, hotels buildings, shopping malls, stations, airports, etc. The three column elevator can be used for the installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations, as well as for single person work such as high-altitude cleaning. The three sets of masts support the operation platform to lift synchronously,ZanstadSelf made hydraulic lifting platform, and the support structure is the same as the single masts platform. It has a super large load capacity and excellent work stability. Integral elevating four column electric elevator: it is refined from high-strength aluminum profiles. Due to the high strength of profiles it adopts four mast column structure, which has excellent stability, flexible operation, large load capacity, hotels, buildings, shopping malls, stations, airports, sports venues, etc. It can be used for installation and maintenance of power lines, lighting appliances, elevated pipelines, and other high-altitude operations such as high-altitude cleaning.
Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
What are the advantages of elevators being loved and widely used by both new and old customers? What are the advantages of elevators being loved and widely used by both new and old customers; The elevator is made of high-strength tested material, making it easy to work in various locations without worrying about crushing the ground. The elevator structure is stable; The component connection strength is very high and stable, and the support mechanism design is very scientific. The overall structure is safe and stable, making people feel at ease. Strong applicability; Leg height adjustment, able to be used based on steps, stairs and complex terrain; By using polyurethane casters, damage to marble, wooden floors, and lawns can be avoided; Able to enter and exit narrow spaces (such as elevators, doors, etc.), construct and operate; Various combinations and beautiful appearance. The elevator requires no maintenance and is rust resistant; The elevator does not require maintenance. If it is not used for a long time, it only needs to be lifted and lowered once every half a month. All its components have undergone anti oxidation treatment, do not rust, and are also resistant to chemical corrosion.