Li ShiSmall electric elevator platformPrice is bullish

Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.

The spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.

Li Shi.When adding hydraulic oil, it is also necessary to pay attention to the structure of the oil cylinder. Some oil cylinders are relatively complex internally, and how many lifting operations need to be carried out during filling to fully fill each position of the hydraulic oil. Therefore,Li ShiElectric wire rope elevator, when filling, try to add as much as possible, and then test and run the machine empty to see if it reaches the rated position.

The oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.

.The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than 0m. In special circumstances when the net height of the building entrance is less than 0m, but in any case, the net height of the lower door opening is not less than 8m. (Article 1 of GB26557-2011)

When the horizontal distance between the edge of the cage and the edge of the landing or between the cage and the landing door is greater than 150mm and there is no effective protection from other structures, the side protection device for the landing entrance should be equipped.

According to the needs of different performance genres, the form of the stage can be changed. For example, using an orchestra pit lift can combine a framed stage with a large lip or even an extended stage. In an experimental theater, using a lift can make the theater have various forms such as an end stage, an extended stage, an island stage, an intermediate stage, a T-shaped stage, the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.

Construction electric elevators should be equipped with upper limit switches that are sensitive and reliable.

The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.

Excellent quality.Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.

Setting requirements: For construction electric elevators with foundations installed on roof slabs, floors,Li ShiAll electric small elevator, or other lower suspended structures, the bearing capacity of the foundation support structure should be checked. Click here to download the construction technical information for free. Basic drainage facilities should be installed.

The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.

The landing door should meet the requirements of the specifications and achieve standardization.

Product survey.Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.

Safety devices: Electric elevators for construction should be equipped with overload detection devices. When the load inside the cage exceeds 10% of the rated load capacity the overload detection device will give a warning signal inside the cage,

The setting of the cable guide frame should comply with the user manual and regulatory requirements.

Li Shi.Work is essential, and the main protective accessories include safety belts, guardrails, protective covers, platforms and stairs, etc.

Low power consumption: When the hydraulic guide rail lifting platform descends, it is driven by the pressure generated by its own weight, greatly saving energy and reducing consumption.

The L distance depends on the selected wall mount model.