Inner MongoliaThe selection of equipment should consider the specific environment. Electric cargo elevators are a type of heavy lifting mechanical equipment that can be used for transporting goods with the help of high-rise buildings. When selecting products, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important, and when in use, Its safety device settings are very good, which can achieve good operation and better performance.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Inner Mongolia.More prominent. However, many times there are many details that need to be paid attention to during the use process, after all, this is the only way to further ensure the effectiveness of the use. The details that need to be noted in the correct situation will include these aspects.
The electric lifting platform needs to work under load according to the regulations on the nameplate during use, but overloading is strictly prohibited during use. Especially in emergency situations, it can only briefly overload by 10%.
.The selection of equipment should consider the specific environment. Electric cargo elevators are a type of heavy lifting mechanical equipment that can be used for transporting goods with the help of high-rise buildings. When selecting products, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important and when in use, Its safety device settings are very good which can achieve good operation and better performance.
The function of an automatic cargo elevator is that the use of an electric cargo elevator can be very stable, without any noise, and maintenance is also very convenient. The service life is also very long. In order to achieve safer results during use and operation, some relevant information or components should be able to achieve
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, photography, landscaping, transportation, docks, airports and ports and large industrial and mining enterprises.
Because hydraulic elevators have the function of automatic and flexible lifting, they can provide protection for the safety of the campus and surrounding areas. Hydraulic elevators have many advantages, such as the ability to use hydraulic drive, which makes it easy to maintain their lifting speed. This is also determined by the reliability or durability of hydraulic methods. Of course, it also has no blind spots and is sturdy and reliable during normal use. The important thing is that the possibility of compression and collision resistance is relatively small, so it is very convenient to use, and it is beautiful and durable. Among them, its guidance is relatively good, with the characteristics of flexibility,Inner MongoliaFixed cargo elevator lifting, reliability, and collision resistance.
It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use, so as to facilitate its use.
Supply chain quality management.Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; LOGO” Program adjustment of time delay to avoid frequent motor movements affecting service life.
The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
Everyone knows that many industries use hydraulic elevators, it is necessary to ensure the stability of the machine. If the machine is unstable, it will have a significant impact during use. So, what details cannot be ignored during the use of hydraulic elevators?
In the process of understanding, the selection of lifting platforms has strong flexibility to a certain extent. When conducting procurement, people should pay attention to these situations and contents, as well as some core influencing factors and situations. If there are other considerations when using these equipment, people can better use them for equipment selection and use. The selection of lifting platforms should take into account these specific usage situations.
management.The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
The design of power units is good. Most power units of guide rail type electric elevators have good design, allowing the durability of the tension chain to be at a high level, ensuring the balance of materials during transportation, and preventing materials from falling off the table. In addition, it also brings stronger pump station power to the elevator, and can be adjusted according to the actual situation of material transportation, ensuring the efficiency of material transportation.
When operating the aluminum alloy lifting platform, these electrical appliances have a lot of protective work or are very important, and with the help of different layers of goods lifting, they should be able to meet certain requirements. The structure of each product is very large and the load-bearing capacity is also very large, and the lifting is very smooth and smooth. So during the installation process, these lifting platforms can achieve higher work efficiency, there are many details that cannot be ignored. It mainly uses an external power supply, so when operating, personnel need to master its operating knowledge which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route,Inner MongoliaMini small household electric elevator, hydraulic lifting
The professional information of aluminum alloy lifting platforms and the development of different equipment are crucial. In the process of understanding, one should be able to understand and pay attention to its automation, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.