peaceSmall ele
peace500kg eleSetting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.
The counterweight guide rail should meet the specification requirements.
peace.The upward movement of the hydraulic cylinder involves lifting heavy objects, and the return oil from the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve. The additional pressure relief valve is used for adjustment, and the pressure gauge reads the value when observing the pressure gauge
When the horizontal distance between the edge of the cage and the edge of the landing or between the cage and the landing door is greater than 150mm and there is no effective protection from other structures, the side protection device for the landing entrance should be equipped.
.Setting requirements: When the distance between the outer edge of the construction electric elevator and the external overhead power line cannot meet the requirements of a small safety distance, the protective measures taken should comply with the specification requirements.
Installation and dismantling personnel and drivers should hold certificates to work.
Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.
Secondly, the lifting platform is driven by electrical energy and lifted by the hydraulic system. During operation, it is necessary to avoid irregular operations. To ensure the normal and orderly operation of the lifting platform and achieve the ideal unloading level,peaceLadder type electric elevator, timely inspection of various functions is essential.
Stop the suspension cage.
Every theater is a public place with a large number of people, and safety considerations should be taken into account in stage design. According to relevant national regulations, in order to prevent accidents caused by the crushing of electric elevators or improper control by drivers. Electric elevators should be equipped with the following necessary safety devices to ensure that the car of the electric elevator stops rising or falling in a timely manner.
property right.Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.
Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around 150-300mm, and the top layer is not affected. It can be customized according to the location and environment.
When the wall bracket adopts non matching standard products, design calculations should be carried out.
It is reported that a fixed electric elevator has good lifting stability and can only be used for fixed operations, as follows: automatic reset type upper and lower limit switches should be installed on construction electric elevators, but the upper and lower limit switches should not be triggered as high
The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than 0m. In special circumstances,peaceElectric cargo elevator, it is allowed to lower the height of the lower door opening,peaceElectric clothes drying elevator, but in any case, the net height of the lower door opening is not less than 8m. (Article 1 of GB26557-2011)
peace.When a rigid 5000mm2 square or circular flat surface is applied with a normal force of 600N to either side of the door, the door may not meet the above requirements, but safety should be maintained.
The L distance depends on the selected wall mount model.
The advantages and disadvantages of several commonly used electric lifting mechanisms are as follows: hydraulic electric lifting mechanisms: using hydraulic technology, smooth lifting and low noise.