HajdusobozloElectric boom elevatorThe foundation of industry development

Implementing multiple shifts of homework should fill in and submit records according to regulations.

There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.

Hajdusobozlo.Do not move after lifting, and do not lift until the four legs are firmly supported.

Pipeline rupture valve: When the hydraulic system pipeline ruptures and the car stalls and descends, it can automatically cut off the oil circuit and stop descent

.Safety performance: Electric elevators not only have the safety device of traditional traction elevators, but also have an overflow valve to prevent excessive system pressure during upward movement

In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between 1m and 2m. And there should be at least protective railings, a half height middle crossbar, and a toe board at least 150mm above the ground.

Every theater is a public place with a large number of people, and safety considerations should be taken into account in stage design. According to relevant national regulations, occupying a relatively small area, improving the utilization rate of the wellbore area.

The suspension cage movement can only be resumed after operator operation.

News Abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric lifting machinery for high-altitude operations in recent years,HajdusobozloElectric automatic elevator, the products of electric lifting platform vehicles have been continuously improved, and various new technologies and materials have emerged making the further development of lifting platform vehicles possible.

OK or not?.During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.

The motor of the hydraulic guide rail lifting platform is set around the wellbore, occupying a relatively small area, improving the utilization rate of the wellbore area.

After the electric elevator passes the inspection, the user unit shall organize the leasing unit,HajdusobozloDC electric elevator, installation unit, and supervision unit to conduct acceptance. For the implementation of construction general contracting, the acceptance shall be organized by the construction general contracting unit. The acceptance form should be signed by the relevant responsible person.

The safety bulletin board for construction electric elevators should be hung at the protective shed of the electric elevator, with a size of 8 meters by 2 meters.

Sampling inspection.Braking. The brake limit switch for partial motion control of the electric hoist traction machine. Assembly that restricts the operation of the lift car when it is opened to a high or low position; If the limit switch controls the overtravel switch. When the car travels to a high or low position, it will take on the function of raising or lowering. In order to prevent the lift car from crashing or sinking, stage equipment should be dismantled with over travel switches that can cut off power and cannot be automatically reset, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements rather than in the shaft; A buffer should be installed that can absorb the energy of the moving mechanism and reduce impact.

Only after the operation of professional personnel can the suspension cage movement be restored.

During the use period, and record the inspection results.

Hajdusobozlo.Setting requirements: The spacing of wall brackets along the vertical direction should comply with the provisions of the user manual.

Before operating the construction electric elevator, routine inspections should be carried out according to regulations and inspection records should be filled out.

Small safe operation distance: Circuit voltage (kV) of external power lines<11~1035~110220330~550 Small safe operation distance (m) 4681015 Setting requirements: A small safe distance should be maintained between the outer edge of the construction electric elevator and the edge of the external overhead power line.