HorovManual pr
HorovElectric When using, the weight should be evenly distributed, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
When a hydraulic lifting platform truck malfunctions, it is necessary to take time to prepare accordingly, and provide timely feedback or communicate with the manufacturer at this time. If a voltage range is used to detect a hydraulic lifting platform truck, it is necessary to turn on the power in this case. The circuit schematic is used to measure the electrical circuit. At this time,HorovAluminum alloy hydraulic lifting platform, the voltage value can be measured and the voltage value can also understand where the fault point is. Therefore, in this case, it is necessary to learn to analyze.
Horov.The brakes of each mechanism should be regularly checked and adjusted for the clearance between the brake pads and brake wheels to ensure flexibility and reliability. There should be no dirt on the friction surface. If there is dirt, it must be cleaned with gasoline or rare materials.
When using, the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, so this detail needs to be noted during use.
.When conducting a resistance check, it is necessary to disconnect the power supply. At this time, the circuit principle can be used to measure and then measure the magnitude of the resistance value
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
The design of hydraulic lifting platform vehicles should consider actual needs, and attention should be paid to these related platform vehicles when using them. When designing, many details of the lifting platform vehicles are crucial, as they can display products and understand prices.
For lifting platform vehicles without manned protection, it is strictly prohibited to carry people during use. At the same time, attention should be paid during use to prevent damage to hands, feet, and clothing.
Safety protection components, in order to ensure safety production work, it is essential to install a lifting platform car for proper protection. The main protective accessories include safety belts, guardrails, platform car stairs, etc.
When using a hydraulic lifting cargo elevator, it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, it is necessary to turn it on or off properly. In this case, there may be short lines or damaged components. Using a table for inspection is relatively better.
Inspection items.When using hydraulic elevators, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
Of course, customization can also be made according to customer needs. If the carrying capacity is relatively large, it can be selected based on its model, which will result in more single shipments. When choosing an electric elevator, you also need to consider its climbing ability. If it has strong climbing ability, it can be suitable for various floor heights, making it more convenient to use. Because the height of the floor has a certain impact on the climbing of electric elevators, as current climbing has undergone safety testing. Attention should also be paid to the climbing speed of the electric elevator to reduce the time of porter. Long term hydraulic lift truck prices are not reversed by manufacturers to avoid price differences, with prices higher than the market
When people choose mobile lifting platform vehicles, it is important to pay attention to their structural stability, as it directly affects whether the entire lifting platform can operate smoothly. If it has high strength and stable operation, it can support the design of the mechanism, and it is very scientific. Therefore, during use, it can ensure the overall structure is safe and stable, making people feel at ease.
High value.When using a hydraulic lifting cargo elevator it is necessary to have corresponding inspection routes. If the route malfunctions and the joint becomes loose, it is necessary to turn it on or off properly. In this case there may be short lines or damaged components. Using a table for inspection is relatively better.
The size of the oil cylinder should be minimized as much as possible while meeting the design requirements. The smaller the size of the oil cylinder, the faster the lifting speed.
The traction wheels of the mobile lifting platform vehicle can rotate at any angle during use, making it convenient to operate in narrow spaces, making it particularly convenient to use. At present the appearance of mobile lifting platform vehicles on the market looks very beautiful, and they are high-end, and upscale, so the appearance looks very attractive and convenient to use,HorovHydraulic lifting platform, especially for lifting, so they can work at different heights. The important thing is that this elevating platform car can have electronic switches, point control, or continuous control, among other options.
Horov.When using hydraulic elevators, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
I believe many people are familiar with mobile elevating platform vehicles. In daily life, we often see that this elevating platform vehicle is used in many fields, but we need to pay attention to details during the use process.
In the past, in large workshops, if goods had to be transferred from one place to another, it would be very expensive. For loading, unloading, and transferring 2 tons of goods, it would require 10 people to work continuously for several hours, using forklifts to operate and multiple forklifts to work simultaneously for one or two hours. Moreover, using forklifts also required professional forklift drivers, and the cost of using them was often high. Is there any way to do this, Can it meet both rapid loading and unloading of goods and low-cost needs? Of course there is, that is the application of fixed loading and unloading platform trucks. A fixed loading and unloading platform truck is an auxiliary equipment that mainly completes the rapid loading and unloading of goods. It has an adjustment function, and the truck has a certain height to cross when transporting goods from the warehouse to the truck. However, a fixed loading and unloading platform truck can adjust the height and serve as a bridge to connect the truck and warehouse,HorovFixed hydraulic lifting platform, meeting a large number of cargo handling needs, But such a large workload requires only one operator to operate, greatly saving labor costs and manpower, improving the production efficiency of the enterprise. Professional hydraulic lift truck manufacturer with high prices, service, on-site settlement, and honest operation!