TarantoBlue co
TarantoSecond The entrance of each landing platform must be equipped with a landing door,TarantoFully electric scissor lift, which must open towards the landing platform side, and the door bolt must be set on the side next to the construction electric elevator.
Manual pump: When the system malfunctions, the manual pump can be operated to pump high-pressure oil to raise the car to the nearest floor position
Taranto.The device should be used within the valid calibration period and operate effectively and reliably. The anti fall safety device should have a valid inspection certificate (or inspection report), and the validity period should not exceed 1 year. Anti fall safety devices have been manufactured for five years
The counterweight guide rail should meet the specification requirements.
.The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, explosion-proof electromagnetic directional valve, throttle valve, hydraulic control one-way valve, and balance valve, causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge. The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects).
Horizontal lead screw mechanical electricity
Setting requirements: The installation and dismantling workers electricians, and other operators of construction electric elevators should have special construction operations.
The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.
Afterwards, it should be scrapped.
Setting requirements: For construction electric elevators that operate in multiple shifts, the handover system should be implemented, the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.
The end height of the guide rail frame above the high attachment point should comply with the provisions of the user manual.
The use of a lifting platform as a tool for storing performance blankets, soft scenery, there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets, soft scenery, etc.
Discount.Low power consumption: When the hydraulic guide rail lifting platform descends, it is driven by the pressure generated by its own weight, greatly saving energy and reducing consumption.
The installation position of the lower limit switch. The installation position of the lower limit switch should ensure that the contact plate triggers the switch when the rated load of the suspension cage decreases, causing the suspension cage to stop. At this time, the contact plate should also be close to the triggering of the lower limit switch
The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.
Taranto.Chain type electric lifting mechanism: With a good guiding mechanism, it can ensure that the equipment does not tilt during operation. Gear and rack electric lifting mechanism: precise transmission and high cost.
Setting requirements: Drainage measures should be set up for the foundation of construction electric elevators to ensure smooth drainage.
From the above comparison, it can be seen that hydraulic electric lifting mechanisms have stable lifting,TarantoLadder type electric elevator, low noise, long service life, large load bearing capacity and are relatively simple, making them suitable for use in stage equipment.