The quality of the standard section should comply with the product manual and specification requirements.
When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.
Egger.The cargo is 0.5m.
The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.
.Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
The setting of the cable guide frame should comply with the user manual and regulatory requirements.
Advantages of electric elevator rotary valve: Simplify the installation of electric elevator pipelines; The operation is more convenient, and the valve can be opened and closed at any time; The installation of a rotary valve reduces the friction of the sealing components; Compact structure,Egger5 meter electric spiral elevator, small size, and space saving; Increased the service life of electric elevator pipelines and solved the problem of easy oil leakage.
Construction electric elevators should be equipped with cable guide frames and comply with regulatory requirements.
Platform.
The use of standard section connecting bolts should comply with the user manual and specification requirements.
reform.Emergency manual valve: In case of power failure,Egger2 meter electric lifting platform, it can cause the car to descend to the nearest floor position and open the door
The list of materials for making landing doors is as follows: Table 1: List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station, and the landing doors should function properly.
Double layer steel mesh: The diameter of the steel bars is 12mm, with a spacing of 200mm.
Setting requirements: The landing door should be standardized and tooled.
Marketing Department.During loading and unloading, the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed 50mm.
Construction electric elevators should be equipped with safety devices to prevent the cage from falling. The anti fall safety device should be functional at all times, including installation, disassembly, and before resetting after action. Fall arrest safety gear
When the distance between the outer edge of the construction electric elevator and the edge line of the external overhead power line cannot meet the requirements in the table above, effective protective measures should be taken.
Egger.The end height of the guide rail frame above the high attachment point should comply with the provisions of the user manual.
The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through an oil filter, throttle valve,EggerElectric basket elevator, hydraulic control one-way valve, and balance valve, and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge. The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects).
There is no need to set up a computer room above the shaft like an elevator, and the top floor height can be installed at least 2.5 meters.