El SalvadorEletighten the joint
Drain and discard the hydraulic oil, remove the oil filter, clean it with compressed air, and then return it to the oil tank and connect the pipeline.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of the elevator. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.
El Salvador.Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground press the up and down buttons to check the mechanical operation, check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine,El SalvadorFully automatic hydraulic lifting platform, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, stand in the center position, press the up button, slowly raise the workbench, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
The model of the elevator; The prices of different models of elevators vary.
.The equipment voltage is 24V DC, effectively ensuring personal safety.
The guardrail structure is integral and collectible, making it extremely simple and convenient to operate.
In modern society, there are many high-altitude work projects, and their danger is not only related to construction management and personnel quality, but also to the working environment and equipment used in construction. Therefore, high-altitude work equipment has received more and more attention, with continuous development and innovation in lifting and lowering,El SalvadorManual hydraulic lifting platform, and has been trusted and used by customers.
The elevator is a multifunctional high-altitude work equipment that uses electric hydraulic transmission. It has the advantages of light weight, self walking, electric starting, self supporting legs, simple operation, large working area, and can safely and stably carry out high-altitude work. After using a mobile elevator for a period of time, it requires overall maintenance. Below are the maintenance precautions for mobile elevators.
Electrical part: It consists of power, signal, safety and lighting devices.
Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
Quotation sheet.Two sets of masts support the synchronous lifting of the working platform, and the elevator has stable operation; The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading and can be assembled or disassembled in one lift; Can be equipped with gantry cross frames; Having the same convenient maneuverability as a single mast,El Salvador4-meter hydraulic lifting platform, the support structure is the same as a single mast platform; It has good load-bearing capacity and is suitable for no more than two people climbing at the same time.
During the rotation operation of the elevator, it is necessary to raise the lower arm to a certain height before starting the rotation. The rotation should be slow, and attention should be paid to whether the distance between the shear arm and the platform to each equipment meets safety requirements.
The main lifting mast adopts high-strength profiles, which have high safety and light overall weight.
Driving under the influence of alcohol is strictly prohibited, and ongoing high-altitude operations should also be terminated if feeling unwell.
retailer.Therefore, the use of stable voltage in elevators is crucial for safe operation. Elevators have high stability, a wide working platform, and a high load-bearing capacity, please ensure voltage stability.
The hydraulic working system of the elevator mainly uses hydraulic pumps for power, so the hydraulic system of the hydraulic elevator needs strong sealing performance. Firstly, it prevents air intrusion and secondly, water intrusion. Air intrusion can oxidize the hydraulic oil, and if there is too much air, the hydraulic system cannot function properly; The invasion of water can emulsify the hydraulic oil, it is necessary to replace the emulsified hydraulic oil of hydraulic elevators in a timely manner. If impurities are found in the hydraulic system, it is necessary to clean them in a timely manner, so that the hydraulic oil can be considered and the hydraulic components can be cleaned one by one.
Before the lift operation, the person in charge of the work should explain the technical and safety aspects to the operator. The website content should include: the content and requirements of the work website; Safety precautions and danger points; Personnel division of labor and scope of responsibility.
El Salvador.Drain and discard the hydraulic oil, tighten the joint, clean it with compressed air, and then return it to the oil tank and connect the pipeline.
Check the hydraulic oil quality and level. When the lifting platform is raised to a high position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the oil tank. When the color of hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, we should not forget to perform year-end maintenance on the elevator. Let's take a look at how the elevator should undergo year-end maintenance.
Variable speed motors extend the lifespan of batteries and motors, as they only consume the necessary energy for operation.