DonggangFixed 
DonggangFully Of course, the hydraulic lifting platform uses a dual protection structure,DonggangFamily small lift table, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
In this situation it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
Donggang.Nowadays, electric elevators are not only used in factories or construction sites, but also in household and indoor use. However, many people are not very clear about its price because there are many manufacturers producing electric elevators on the market now. So what about electric elevators? Is the price expensive?
What is the difference between a self-propelled elevator and a self-propelled hydraulic elevator?
.The situation and content of the lifting platform are very crucial. During the process, the current and other operations are also crucial. In order to make the heavy object descend smoothly, improve the safety and reliability of braking, and also understand the balance situation during the setting process. It can maintain pressure and prevent the descent speed from being affected by heavy objects, as well as its lifting speed, Make it more reliable and secure. Overall, when selecting and using equipment,DonggangMobile small flat elevator, one should understand the working principle, some information about the lifting platform, and be able to consider some design principles and situations when operating.
Safe operation voltage; Select rolling guide shoes, with high accuracy, wear resistance, and smooth lifting.
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
The fixed lifting platform has a very obvious advantage over other types of work platforms, people often use fixed lifting platforms for operation.
In a highly competitive market, in order for lift stage manufacturers to have a more long-term operation and development, they need to adopt certain methods to increase order volume in their daily operations. Only with an increase in order volume can manufacturers achieve good business development. There are actually many ways to increase orders, but for manufacturers, the choice of method still needs to be determined based on the actual business situation. However, some common methods may include these.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.
The cost is reasonable.Select the elevator dedicated leveling permanent magnet switch,DonggangSmall fixed electric lifting platform, so as to facilitate its use.
When using equipment people will consider different information and situations, and reference them based on these elements. Therefore, it can bring better work efficiency to people, and also enable them to achieve certain efficiency during the use process. Many manufacturers can cooperate with some very professional companies when designing products. Because material selection also meets strict requirements and standards, it can provide customers with better quality choices when designing products.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.
OK or not?.One important reason why people widely use this software in industrial production processes. In order to transport products to designated locations in a timely manner, people often use this device for operation during the transportation process, and this device also has excellent working stability.
In short, there are many things to pay attention to when using electric lifting platforms in daily life, but the above two aspects will be more prominent because they directly affect the actual use of the platform. So special attention needs to be paid during daily use.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
Donggang.Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate then the machinery cannot operate normally.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, Clean the oil filter and the oil inlet filter is blocked. Add enough oil, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)