Firstly, unstable voltage can easily burn out various electrical components inside the operation box, making the equipment unable to receive signals.
The vehicle body should be grounded according to regulations, cylinder sleeve type, multi column type, curved arm type elevator (replacement of folding arm type), chain type elevator (elevator, cargo elevator).
What are the standards for selecting manufacturers of elevators? After confirming the model, configuration, and manufacturer, you can basically understand how much the user wants for a lift.
.Drain all the hydraulic oil in the oil tank, open the oil tank, take out the oil suction filter, clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect, and whether the equipment still has problems after the maintenance is completed.
At the end of the year, many customers called to inquire about elevators. During this time of year, various units need to hang lanterns etc. Many customers do not know how to choose a suitable elevator. Below is an answer for everyone. Lifts can be generally divided into three types: manual traction mobile lifting and lowering platforms: This type of lifting platform is cost-effective, cheap, and widely used, When moving, it requires manual traction or mechanical pulling from a car, and when lifting, it requires an external 220V or 380V power supply to lift.
After the elevator is lifted, it is necessary to fully study the maintenance manual of the elevator and do a good job in use and maintenance. In the detection of various indicators of the elevator, multiple tests should also be conducted. For the second trial load, an empty load test can be selected to verify whether the lifting and lowering speeds of the elevator are reasonable, whether the stability of the platform meets the requirements whether the sound is normal, and whether the rated lifting height can be reached. If the test data is normal, a second trial load test can be conducted; The second trial load test can choose half load test with a focus on verifying the stability of the platform. If the shaking resistance is within the allowable range, a third test - full load test can be conducted to determine whether all parameters of the platform are normal under the rated load state. If it is normal, the fourth test - overload test can be conducted, and 110% of the load can be added for the test to verify whether the anti overload device setting of the platform is reasonable. If the setting is correct, the lifting platform cannot rise under overload. If it can rise, it indicates that the overload device setting of the lifting platform is unreasonable, and the manufacturer should be asked to adjust the setting again.
The single mast elevator adopts high-strength and high-quality materials, which have the advantages of beautiful appearance, small volume, light weight, smooth lifting, safety and reliability.
Workshop cost.The elevator is a multifunctional high-altitude work equipment that uses electric hydraulic transmission. It has the advantages of light weight, self walking, electric starting, self supporting legs, simple operation, large working area, it requires overall maintenance. Below are the maintenance precautions for mobile elevators.
It is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas from the elevator engine contains carbon monoxide. This is a toxic gas that has been exposed to low concentrations of carbon monoxide for a long time. It can cause symptoms such as headache,Nuremberg 4-meter hydraulic lifting platform, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion, it can cause death, such as starting the engine of the equipment in the garage.
Single group high-strength mast elevator, with light weight and good maneuverability suitable for single person operation.
Firstly, making the equipment unable to receive signals.
Inspection items.And different uses: single column electric elevators: This series of products is indoor and widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation unstable voltage can easily burn out various electrical components inside the operation box, and can enter general lobbies. It can enter and exit the elevator at will with low power consumption, no pollution, and does not harm the ground during work. It can be used for wall work and exploration work, without dead corners. The single column electric elevator, equipped with a gantry cross frame accessory, is very suitable for maintenance work in cinemas, auditoriums, etc. The gantry frame is easy to assemble, labor-saving to operate, flexible to move, capable of crossing obstacles such as fixed seats with a height of up to 1m, and can operate stably on steps. Made of high-strength rectangular steel pipes, with good rigidity and stability. Equipped with universal casters for flexible mobility. The span of the two end brackets can be adjusted, which is suitable for crossing different obstacles. The two end brackets are vertically adjustable and can be used for operations on slopes or steps with a certain slope.
In the process selection of elevator products, we must pay attention to various matters and not blindly choose. The best thing is to conduct market research, on-site investigation, and procurement of the product, which can reduce the occurrence of faults. Good product performance and quality have created good usage effects for us
Equipped with a manual descent valve for emergency descent in case of power outage.
Nuremberg .Hydraulic lifting platforms can be divided into: four wheel mobile, two wheel traction, car modification, car type, and lifting heights ranging from 4 meters to 18 meters. This series of products has a load capacity of 0.1 to 0.8 tons,Nuremberg Hydraulic elevator structure, and can also be customized according to user requirements, with a high load capacity of up to 10 tons.
Due to its beautiful appearance, light weight, flexible operation and convenient implementation, elevators are particularly suitable for various high-altitude work platforms, such as high-altitude maintenance, factories, decoration,Nuremberg Lifting hydraulic lifting platform, decoration, cleaning and anti-corrosion, etc. At the same time, we should always keep in mind the safety operation regulations for it.
Single mast elevator Standard configuration of single mast elevator: platform height specifications: optional 4m, 6m, 8m, 9m; Power supply: single-phase AC (AC220V/50HZ), other forms can be optional; Movement method: manual traction.