Small store7-meter lifting platform carProduction steps and inspection requirements

Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, which is used to vertically transport items from the ground to a designated location or even the stage plane. The lifting platform of the music pool is often used for transporting movable seats, when there is a side stage and a side car platform is set and the main stage lifting platform usually covers both the performance area and the foreground area. According to the requirements of stage process layout, corresponding auxiliary lifting tables and leveling lifting tables are set at the corresponding positions. When there is a rear stage and a car mounted turntable is set, front and rear auxiliary lifting tables and leveling lifting tables are set at the corresponding positions as needed.

Before using the lifting platform vehicle, first check whether the doors of each floor are closed and whether the emergency stop switch is reset (the emergency stop switch is reset, rotate clockwise), and check the side of the emergency stop switch. After completion, the operation can be started.

Small store.Of course, for electric elevating platform vehicles, in addition to the above advantages in design, there are also many other advantages that are also very good. So many times, if there is a need for this aspect of use, you can try to choose this type of lifting equipment, after all, it has a lot of security in all aspects.

If encountering or affecting the safety technical performance of construction elevators, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.

.Elevating platform vehicles are strictly prohibited from passengers.

To meet the needs of choreographers and choreographers in different plays, different heights of the lifting platform can be used to change the shape of the stage according to the requirements of the choreographers and choreographers, in order to adapt to the requirements of the plot for the scenery or venue, and save manpower and material resources for setting up. Utilizing the tilting device of the lifting platform to form a tilting table, it is necessary to provide more than 6 months before proceeding, and it is also necessary to retest the construction elevators and test the acceptance results before proceeding. Therefore, this point requires everyone's attention and understanding. When carrying out repairs or maintenance, it is necessary to follow the instructions of the construction elevator. The main purpose of repairing or maintaining the elevator is to ensure that each component can operate well. For factory elevators, rated load tests are required. Especially for elevators under construction, it is necessary to conduct a rated weight drop test every three months,Small storeHand operated lifting platform truck, cut off the power supply during maintenance, and set up eye-catching warning signs. Construction elevators with safety hazards are not allowed to be used.

When abnormal situations are found during the use of the platform, the operator should immediately stop the operation of the platform and report to the equipment department for maintenance; If the fault is not resolved, it is prohibited to use and a warning sign is hung.

Everyone knows that in the manufacturing industry, a large amount of labor is required, and this industry faces significant employment pressure. Therefore, in this situation, the use of electric lifting platforms can replace manual labor, which is also the main solution to this problem. The use of this equipment can greatly save production costs, making it more convenient to use. So why can electric lifting platforms be widely used in the industrial field?

The use of a lifting platform as a tool for storing performance blankets, soft scenery, etc. In some theaters, there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets,Small storeSingle person lifting platform vehicle, soft scenery, etc.

Customer first.To understand the operation of the mechanism, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.

Many theaters use a lifting platform as a vertical transportation tool for goods. The rear of the main stage or the end of the side stage in many theaters are equipped with a set container transportation lifting platform, etc. The layout and size of the lifting platform are often in line with the performance area of the box shaped mirror frame stage. Different plays require different sizes of performance areas, and the main stage lifting platform usually covers both the performance area and the foreground area. According to the requirements of stage process layout, when there is a side stage and a side car platform is set, corresponding auxiliary lifting tables and leveling lifting tables are set at the corresponding positions. When there is a rear stage and a car mounted turntable is set front and rear auxiliary lifting tables and leveling lifting tables are set at the corresponding positions as needed.

To meet the needs of stage craftsmanship and layout; Product; In the music and dance theater stage arranged in a zigzag pattern, auxiliary lifting platforms are often arranged in front back, left, and right of the main stage lifting platform. The side and rear auxiliary lifting platforms are used for the smooth opening of the side platform and rear vehicle turntable, while the front auxiliary lifting platform is used to place the rear vehicle turntable near the platform entrance. The leveling lifting platform below the side platform and rear vehicle turntable can be used to level the platform after the side platform or rear vehicle turntable is driven out, so that the entire platform does not have a height difference, ensuring the safety of the cast members.

However, before the electric cargo elevator is put into use,Small storeGenie lifting platform car, it needs to undergo a fall test, which is conducted every three months. During the fall test, adjustments need to be made, and the braking distance during the fall process should not exceed 2 meters. The safety device needs to be reset every time it falls. Of course, the safety device needs to be adjusted or repaired accordingly, These all need to be carried out by the manufacturer or established recognized unit, especially the anti fall test requires professional personnel to operate.

Installation requirements.After starting work every day, the elevator driver needs to carry out standardized operations. Of course, before carrying out the operation, the elevator needs to be inspected to ensure its safety before proceeding with the operation. The user unit needs to conduct a comprehensive inspection of the construction elevator every month and record the inspection results accordingly.

Everyone knows that campus security is very important because it directly affects thousands of households. Therefore, in order to protect the future of our country, we need to continuously enhance campus security awareness.

When abnormal situations are found during the use of the platform, the operator should immediately stop the operation of the platform and report to the equipment department for maintenance; If the fault is not resolved, it is prohibited to use and a warning sign is hung.

Small store.When using a lifting platform truck, we need to consider our own usage needs. If the usage needs are not very large, we can use a lifting platform truck with a lower load. However, if we need a higher bearing capacity, we can choose a product with a weight of 4000 kilograms. These devices may be more suitable for meeting our own needs. Of course, when using a scissor lift platform truck, the merchant will test it for us, and then this saves us a lot of time and also makes us more confident in using it.

When using an elevating platform truck to transport goods up and down, try to place the goods in the middle of the lift car as much as possible to avoid tilting or getting stuck during operation, and do not start the platform when the goods are not stacked stably.

When using an elevating platform truck to transport goods up and down, try to place the goods in the middle of the lift car as much as possible to avoid tilting or getting stuck during operation, and do not start the platform when the goods are not stacked stably.