ComlowSmall moThe professional information of aluminum alloy lifting platforms and the development of different equipment are crucial. In the process of understanding one should be able to understand and pay attention to its automation, as well as understand its innovation in use. Many professional designers will learn about the information of these lifting platforms and their specific usage situations when designing platforms.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil,ComlowSmall fixed lifting platform, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Comlow.The current stage effect is very important, and if you want to meet the corresponding requirements, and many people have no way to start when making purchases. So
Trailer curved arm elevator: can be hung on a car, synchronized with the car, suitable for outdoor high-altitude operations. Lifting method: It is not convenient to use the power supply, but it can be driven for lifting. Beautiful appearance and convenient walking.
.In the process of understanding, the selection of lifting platforms has strong flexibility to a certain extent. When conducting procurement, people should pay attention to these situations and contents, as well as some core influencing factors and situations. If there are other considerations when using these equipment, people can better use them for equipment selection and use. The selection of lifting platforms should take into account these specific usage situations.
When using a hydraulic lifting platform, there are many details that cannot be ignored. It mainly uses an external power supply, so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
When there is a power outage, manual emergency descent can be used, which is safe, convenient, fast, and practical.
Firstly, elevators can be used in many construction projects and can be introduced into the high-altitude elevator industry. It is important to play a leading role in these industries, and it can reduce costs, making it very convenient to use. Simply put, this device is safer and more reliable during use. Due to the manual construction and production of steel pipe scaffolding, there are situations of non-standard or material wear during the design process of the structure. Local instability can also have some impacts, and inadequate protective measures can have a significant impact. Especially when there are significant safety hazards for items or personnel during the operation process, the use of mechanical adjustment structures can ensure that the lifting process can always maintain a horizontal state, which is also the advantage of using elevators. During use it can be ensured that the lifting process can maintain a horizontal state and form a stable support structure, check the connections of each part during use and tighten them in a timely manner if there is any looseness. All connecting shafts require the use of split pins in order to ensure sufficient use and better utilization.
Test method.Suitable for 2-3 story steel structures or concrete workshops, both internal and external.
Chain or wire rope breakage protection device.
Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; LOGO” Program adjustment of time delay to avoid frequent motor movements affecting service life.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
Highly recommended.In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner and then troubleshoot the problem before continuing to use it. This way, hydraulic cylinders the motor shaft can be used and the effect is good.
Seal components,Comlow1 ton fixed lifting platform, and electric motors all have an impact on the operation of the elevator. If you do not pay attention to the situation of these three components, causing certain long-term problems with these three components will not only affect the speed of object delivery, but also threaten the safety of the object, making it possible for the object to fall from a high altitude for a long time. Therefore, enterprises must pay attention to the maintenance of these three components.
The selection of equipment should consider the specific environment. Electric cargo elevators are a type of heavy lifting mechanical equipment that can be used for transporting goods with the help of high-rise buildings. When selecting products, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important, and when in use, Its safety device settings are very good, which can achieve good operation and better performance.
Comlow.When using, the weight should be evenly distributed, mainly in the center of the countertop. However, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
Suitable for various rugged terrain in the wild, with a wide range of spatial operations, mainly used for construction, bridge construction, ship manufacturing, airports, mines, communication and power facilities construction, and outdoor advertising engineering machinery equipment.