Silverson3-metOf course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time, it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
The oil quality brand lifting platform is a multifunctional heavy loading and unloading mechanical equipment, which can be divided into fixed and mobile, guide rail type and curved arm type. Fixed types include scissor fork type lifting cargo elevators, chain elevators, loading and unloading platforms, and attached electric construction platforms.
Silverson.The design of power units is good. Most power units of guide rail type electric elevators have good design, allowing the durability of the tension chain to be at a high level, ensuring the balance of materials during transportation, and preventing materials from falling off the table. In addition, it also brings stronger pump station power to the elevator, and can be adjusted according to the actual situation of material transportation, ensuring the efficiency of material transportation.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
.The hydraulic lifting platforms used in different industries are different, so when making a selection, it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Select the elevator dedicated leveling permanent magnet switch, which has a good leveling effect.
Especially when its pipes are in use, they are quite boring and can roll, so in this case, they need to be blocked or tied tightly. This is relatively appropriate, so it is necessary to pay attention to these details during use. Especially for unmanned protective lifting platforms, it is not allowed to carry people during use, and it is strictly prohibited to carry people. If the electric lifting platform carries people during use, it is equipped with railings or anti crack valves, which are mainly used to prevent the oil pipe from breaking or causing its workbench to fail during use and then descend.
What are the applicable ranges of guide rail hydraulic lifting platforms?
According to mobility, it is divided into fixed lifting platforms and mobile lifting platforms. Compared to the latter, the former has poor mobility and cannot be moved anytime, you must use special tools to lift the fixed lifting platform and then place it elsewhere. Despite its poor mobility, its reliability is strong so many companies have chosen this device.
The distance between heavy and empty loads is small, LCD display call boxes with high leveling accuracy and easy adjustment. Standard elevator boards, relevant wiring harnesses, and connectors are selected for easy adjustment
Create brilliance.The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal engineering, electricity, advertising, communication, photography, landscaping, transportation, docks, airports and ports, and large industrial and mining enterprises.
When using an electric lifting platform, there are many details that need to be noted, such as placing it on a flat surface during use to prevent tipping during work. In addition, what are the precautions for using electric lifting platforms?
Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; LOGO” Program adjustment of time delay to avoid frequent motor movements affecting service life.
The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, photography, landscaping, transportation, airports and ports, and large industrial and mining enterprises.
Finance Department.Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
The electric lifting platform can effectively meet the diverse production needs of products during use, repeatedly perform consent actions, and do not get tired during operation,SilversonHydraulic small lifting platform,SilversonFixed double scissor fork lifting platform, thus freeing up tedious and repetitive employees for work. This helps to increase efficiency and improve the overall efficiency for manufacturers or production workshops, making it very convenient to use.
The hydraulic lifting platforms used in different industries are different, it is necessary to choose based on its model and also according to the working environment. So what are the characteristics of hydraulic lifting platforms?
Silverson.Hydraulic system pressure loss explosion-proof protection device.
Heavy steel wire rope wheels or heavy-duty specialized chains ensure safety.
When there is a power outage, manual emergency descent can be used,SilversonFixed hydraulic pressure for lifting platform, which is safe, convenient fast, and practical.