Lorient Small Of course, the hydraulic lifting platform uses a dual protection structure, which can make the work relatively safer. When lifting, an appropriate working surface can be selected, so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized, so that maintenance and debugging can be carried out before leaving the factory. At the same time it can also ensure that all technical indicators can meet the design requirements, but it is necessary to connect the ground wire during use. Of course, the hydraulic electrical system does not need to be adjusted in this situation.
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents,Lorient Hydraulic elevator fixed type, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
Lorient .Basically, electric lifting platforms are commonly used in many industries, as they are necessary for the movement and transportation of goods. In fact, there are many types of lifting platforms in the market, and the reason why people are willing to choose this type is closely related to some of its characteristics. And these characteristics are usually reflected in the following aspects.
The oil quality brand lifting platform is a multifunctional heavy loading and unloading mechanical equipment, which can be divided into fixed and mobile, guide rail type, and curved arm type. Fixed types include scissor fork type lifting cargo elevators, chain elevators, loading and unloading platforms, and attached electric construction platforms.
.What are the applicable ranges of guide rail hydraulic lifting platforms?
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure,Lorient Fixed hydraulic elevator, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
It is also necessary to check its climbing ability. If it has strong climbing ability, it can be suitable for various floor heights, making it more convenient to use. Because the height of the floor has a certain impact on the climbing of electric elevators, as current climbing has undergone safety testing. Attention should also be paid to the climbing speed of the electric elevator to reduce the time of porter.
The characteristics of hydraulic lifting platforms are obvious, such as their relatively light overall weight and good maneuverability, allowing even a single person to operate, making them relatively suitable. The mast columns of its system are equipped with guide wheels, so its lifting and lowering are relatively stable during use. Of course, attention should also be paid to the structure of the hydraulic lifting platform to ensure its compact structure, so as to ensure its size during transportation. Only in this way can you enter the car of a general elevator, and then you can smoothly open the door. Of course, some small and narrow channels are also possible, so we need to pay attention to this point.
Quality risk.Suitable for various rugged terrain in the wild, with a wide range of spatial operations, mainly used for construction, bridge construction, airports,Lorient Fixed lifting platform, mines, port terminals, communication and power facilities construction and outdoor advertising engineering machinery equipment.
The functions of electric cargo elevators are very diverse, and many equipment designs are very complex. If ideal delivery requirements can be achieved during operation, the sealing conditions, specific critical states, and information need to be taken seriously. It is also crucial to understand the safety performance of these operations, Some security information is also very important, and it is important to pay attention to the characteristics of performance.
When using a hydraulic lifting platform, there are many details that cannot be ignored. It mainly uses an external power supply so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time it is also necessary to master corresponding emergency response plans. When processing, which is the basic content. So in addition it is also necessary to check the corresponding route, hydraulic lifting
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing, installation issues, dirt issues)
Convenient and efficient.Having a better understanding of the way to close the switch or the situation in each automatic design aspect can improve efficiency and pay attention to these different information when using them.
With the development of electric elevators, among which the type used in many industries is the guide rail type. Nowadays, many mechanical equipment manufacturers in China can produce guide rail type elevators. Enterprises can choose the appropriate elevator based on their own material transportation situation to accelerate the speed of material transportation. So, with high leveling accuracy and easy adjustment. Standard elevator boards, LCD display call boxes, relevant wiring harnesses, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.