BrusselsFixed The situation and content of the lifting platform are very crucial. During the process, and also understand the balance situation during the setting process. It can maintain pressure and prevent the descent speed from being affected by heavy objects, as well as its lifting speed, Make it more reliable and secure. Overall, when selecting and using equipment, one should understand the working principle, some information about the lifting platform, and be able to consider some design principles and situations when operating.
To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.
Brussels.For project engineering, if the selected construction elevator can ensure the safety of construction workers, of course, it can also be provided
The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects). The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve, hydraulic control one-way valve, throttle valve, and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking, a balance valve is installed on the return oil circuit to balance the circuit and maintain pressure, so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed. To ensure safe and reliable braking and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure.
.In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage, the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.
The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators, and these details cannot be ignored during the use process.
The functions of electric cargo elevators are very diverse, and many equipment designs are very complex. If ideal delivery requirements can be achieved during operation, the sealing conditions, specific critical states, and it is important to pay attention to the characteristics of performance.
It can be seen that the hydraulic lifting platform needs to carefully inspect the hydraulic and electrical systems before use Some security information is also very important, as long as it is operated properly you will find that its quality is also quite excellent. In the process of daily use, there will basically be no problems.
The selection of equipment should consider the specific environment. Electric cargo elevators are a type of heavy lifting mechanical equipment that can be used for transporting goods with the help of high-rise buildings. When selecting products, they can be used for transporting goods between various working floors, especially in some underground warehouses or other production work. The use of automatic cargo elevators in workshops is very important, and when in use, Its safety device settings are very good, which can achieve good operation and better performance.
Credit guarantee.Any mechanical equipment has a certain working principle, and important components are very important when using a lifting platform. When making a selection, the lifting platform should be able to understand the specific working principle during use. When operating, it is formed by a vane pump with a certain pressure and can be operated through oil filter directional valves, throttle valves, etc, It can make its activity upward and lift heavy objects. During operation the pressure can be adjusted, and a pressure gauge can also be used to observe some information.
When using a hydraulic lifting platform, there are many details that cannot be ignored. It mainly uses an external power supply so when operating, personnel need to master its operating knowledge, which is the basic content. At the same time, it is also necessary to master corresponding emergency response plans. When processing, it is also necessary to check the corresponding route, which is the basic content. So in addition, hydraulic lifting
The top floor height is not affected and can be customized according to the on-site environment.
The purpose of the curved arm elevator: The curved arm high-altitude work vehicle is widely used for installation, maintenance, and climbing operations in industries such as municipal engineering, electricity, street lighting, advertising, communication, photography, landscaping, transportation, docks, airports and ports, and large industrial and mining enterprises.
Quality assurance.Electrical system explosion-proof button SB1&flash; The rotation of the SB6 motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease, and; LOGO” Program adjustment of time delay to avoid frequent motor movements affecting service life.
Electric motor is also very important in the entire elevator, which is related to the operating efficiency of the elevator. If the motor does not work properly, the efficiency of the elevator will be reduced. Once the working efficiency of the elevator decreases, the work progress will slow down, making the enterprise unable to complete the object transportation work as scheduled, resulting in the enterprise being targeted by customers. Therefore, it is important to pay attention to the state of the motor.
Trailer curved arm elevator: can be hung on a car, synchronized with the car, suitable for outdoor high-altitude operations. Lifting method: It is not convenient to use the power supply, but it can be driven for lifting. Beautiful appearance and convenient walking.
Brussels.The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.
Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, check if the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed,BrusselsLaboratory small lifting platform, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing,BrusselsSmall electric lifting platform 1 meter high, installation issues, dirt issues)
Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.