EdMechanical fixed boarding bridgeTechnology of smelting waste residue

When replacing hydraulic oil, sometimes poor hydraulic oil can also cause noise on the hydraulic boarding bridge, as well as noise when the pump station enters the air.

conduct.

Ed.Keep the hydraulic boarding bridge system clean: regularly replace the oil and filter. Good hydraulic oil contains various additives that can prevent oil deterioration or blockage of system components. However, these additives will lose their effectiveness after a period of time. Therefore, all parts should be scrubbed and cleaned. When not working, the workbench should be lowered to a low position.

.Shake the handle to raise the boarding bridge to the height of the container.

Common&quo; Streamline” Open joint planning, with a welding area more than three times that of other traditional pipeline joints, greatly extending the service life and protection life.

Shake the handle to raise the boarding bridge to the height of the container.

Check if the manual valve is open. When using, it must be opened, otherwise the boarding bridge may be damaged.

Features: Adopting a foldable arm (two section arm, three section arm), with a working height of 15-45 meters, and the lifting arm can rotate 360 degrees;, Both the turntable and the work platform can be operated. The work platform can safely walk with the boom in any position,EdElevated boarding bridge, and the walking speed decreases with the rise of the lifting height. Set up the upper and lower platforms (ground platform and platform vehicle platform), and use directional switches to switch between the upper and lower platforms.

The safety valve of the mobile hydraulic boarding bridge can also generate high noise. When air is mixed into hydraulic oil, the relief valve gets stuck or severely worn, and the fatigue deformation of the relief valve spring leads to unstable pressure regulation of the relief valve. The pressure release time of the relief valve is too short, which can easily lead to local stability of the pilot valve performance of the relief valve. Noise is generated by the vibration of the pilot valve's air. Therefore we should regularly clean the safety valve, and replace it if it is damaged or severely worn.

average method.During construction, the factors of loading and unloading operations were not taken into account. The platform type loading and unloading bridge serves as a remedial solution and can also meet the requirements for loading and unloading operations into truck carriages. The platform type boarding bridge is also designed in various structural forms according to different on-site conditions. It can also be adjusted up (below the cargo platform) or down (below the cargo platform) within a certain range which can meet the installation and use of most loading and unloading platforms. Is the boarding bridge easy to use? The boarding bridge is an auxiliary equipment used to bridge with the freight car and is designed to solve the height difference between the freight car and the ground. Suitable for fixed or mobile loading and unloading of goods, allowing forklifts to smoothly enter the carriage to load and unload goods, requiring only one person to quickly load and unload goods, which is labor-saving.

Open the manual valve, slowly lower the boarding bridge, and secure more than 90% of the lip plates at the bottom of the container.

Shake the handle to raise the boarding bridge to the height of the container.

Open the manual valve,EdMoving the boarding bridge,EdHydraulic fixed boarding bridge, slowly lower the boarding bridge, and secure more than 90% of the lip plates at the bottom of the container.

quality index.Hydraulic boarding bridges should strictly adhere to the principle of being overweight, as overloading may cause damage to objects; Working on a lifting platform without protective barriers may cause personnel to fall and cause casualties.

When working at heights exceeding 1.5 meters, safety nets or safety belts must be used.

The precautions during the use of hydraulic boarding bridges are hoped to be helpful to you.

Ed.　　1. Before use, check the boarding bridge for obvious damage such as cracks and broken wires.

During use, close attention should be paid to the condition of the equipment, and if there are any problems, the use should be stopped immediately.

Shake the handle to raise the boarding bridge to the height of the container.